Oil Pressure Sender Unit Adapter

Tee piece doubler to allow an oil pressure switch and sender unit to be branched off the same port. Uses standard M14 x 1.5mm threads suitable for both warning light switch EE004 and sender unit EE035. Supplied with two aluminium sealing washers for either side of the adapter branch. Replacement aluminium sealing washers FS074 are available if required.

FIAT X1/9 USA & Canadian models -

• These were not supplied with an oil pressure gauge and typically do not have the factory sender take-off adjacent to the oil filter. However, if you're retro-fitting an oil pressure gauge, then this Tee adapter can be used to branch off the oil pressure warning light switch port on the engine block to provide a suitable take-off for the EE035 sender unit.

Lancia Montecarlo S2 & Lancia Beta VX models -

• The factory oil pressure sender for these cars is no longer available; They originally featured a banjo style fitting and required the longer oil pressure switch EE302 to secure the unit in a single port. However, the standard sender unit EE035 can be retro-fitted using this Tee adapter to convert the existing port and allow the standard oil pressure switch EE004 to be used instead.