X1/9 Head Gasket Set - 1500 (1986 to 1988) with Cam Seal

Head gasket set for 1500 engines produced from 1986 to 1988. This engine type has ten M10 bolts (with either original 17mm or later 15mm hex heads) and four additional M8 bolts on the spark plug side. Complete with valve stem oil seals and cam shaft seal. Supplied by Guarnitauto, the leading engine gasket manufacturer.

Note: For use on Fuel Injection engines, you will need to supplement the set with manifold gasket GO064.

Set contains:

• Cam base gasket (0.4mm)
• Cam cover gasket
• Cam housing end plate gasket
• Cam shaft oil seal
• Head gasket M10 '14 bolt' (uncompressed thickness ~1.8mm)
• Manifold 2 piece gasket (carburettor use only)
• Thermostat cover gasket
• Thermostat housing to head gasket (two supplied, standard and EGR blanking)
• Thermostat O-ring seal
• Valve stem oil seals (8)
• Water pump by-pass pipe gasket
• Water pump housing to engine gasket

The following are not included, but can be ordered separately if required:

Carburettor base gasket
Exhaust flange gasket
Fuel Injection intake gaskets